Thunder is a plane designed to be resistant and withstand many flights, aimed at air-modelers that seeks to fly a medium-scale 2,300kg plane printed with 3D technology and for those who doesn’t like to make a fool of themselves in front of their friends by ruining the plane on its first flight.
Thunder is an easy plane to print, assemble and repair thanks to the Glue Free technology developed exclusively in 3DBerridi, a technology that allows joining many of the parts of this plane without glue, which will help us when it comes to assembling and repairing in case of collision.
We have achieved perfect fittings in our pieces both in the wings and in the rest of the pieces with exclusive 3DBerridi assembly systems, obtaining really strong and precise joints and fittings. We use carbon tubes for both the wings and the fuselage which guarantees a greater durability, firmness and strength.
For the wings and the tail, we use the technology “Single Layer”, light and resistant structures in addition to unique construction methods developed in 3DBerridi.
An easy plane to print, ride and fly that I can GUARANTEE you will love.
If you want to have fun printing, building and especially FLYING a plane, “Thunder” is your plane.
Weight: 2300gr in flight
Wing profile: Clarck Y
What does the Thunder file include?
Gcodes for 1.75 mm filament for direct extrusion
Lamination profiles for Simplify3d
We are really proud of taking a step further and being the first to implement an online shop with the necessary components to assemble our planes. All the components that are in our store are tested and the planes have been designed to use those components. I thank you for obtaining the necessary material here, to encourage me to continue developing all the ideas I have in mind. Thank you!
You can get the most important components to assembly the aircraft at the following link:
The hardware you need for your plane is as follows:
2 round carbon tubes for the fuselage and 12x10x1000mm wing.
4 micro servos of 9 grams and 12mm x 23mm with metal sprocket with a torque of 2kgr
12ox320x135 carbon landing gear
Wheels diameter 80mm. If you are going to use it on very smooth surfaces they can be of a smaller diameter 15 screws with a diameter of 2.5 mm x 20 mm.
15 screws with a diameter of 2.5 mm x 10 mm.
15 M3x15 screws with their corresponding nuts.
Nylon hinges 16x16x28
6 servo extension cables of 375mm.
2 M6x45mm screws with corresponding nuts
I recommend EMP N4240 850KV 3-4S 800W Brushless motor with a 2200mAh-3300mAh 4s battery, 13×5 propeller and a 50a speed control