3D Acrobatic "Glue Free" Entry Level
Resistant acrobatic aircraft which can be assembled and repaired easily without the use of glue, thanks to the “Glue free system”. It’s a perfect plane to start in the aeromodelling with 3d printing. Very easy to print and assembly.
Hope you have fun!
- Wingspan: 1155 mm
- Length: 1100mm
- Wing profile: Raf30
- Weight in flight: 1600gr
- Wing surface: 24,25 dm2
- Wing loading: 69gr/dm2
0$ Free Model
What does it include?
- Stl files
- Printing instructions
- General recommendations
- Profiles for Simplify3d and Cura 14.07
You will need the following material:
Carbon tubes for the fuselage. You can choose between these options:-round tube diameter 14x12x1000mm-square tube 15x15x1000mm
for the wing 1 carbon rod with an outer diameter of 12 mm, an inner diameter of 10 mm and 1000 mm in length.
4 micro servos of 9 grams and 12 mm x 23 mm with metal gear with a possible torque of at least 2,5 kg.
Carbon landing gear 12ox320x135
Wheels with a diameter of 90mm. If you are going to use it on smooth surfaces it can be of a smaller diameter.
Small landing gear
About 15 bolts M3x15 with corresponding nuts
About 15 lag bolts with a diameter of 2.5 mm x 20 mm.
16x16x28 nylon hinges.
6 servo extension cables 375mm in length.